Optimization of Process Parameters of Micro Wire EDM

Agarwal, Ricky (2010) Optimization of Process Parameters of Micro Wire EDM. BTech thesis.

PDF 731Kb

Abstract

Wire electrical discharge machining process is a highly complex , time varying & stochastic process. The process output is affected by large no of input variables. Therefore a suitable selection of input variables for the wire electrical discharge machining (WEDM) process relies heavily on the operator‟s technology & experience because of their numerous & diverse range. WEDM is extensively used in machining of conductive materials when precision is of prime importance. Rough cutting operation in wire EDM is treated as challenging one because improvement of more than one performance measures viz. Metal removal rate(MRR), surface finish & cutting width (kerf) are sought to obtain precision work. In this paper an approach to determine parameters setting is proposed. Using taguchi‟s parameter design , significant machining parameters affecting the performance measures are identified as pulse peak current , pulse on time, and duty factor . The effect of each control factor on the performance measure is studied individually using the plots of signal to noise ratio. The study demonstrates that the WEDM process parameters can be adjusted so as to achieve better metal removal rate, surface finish, electrode wear rate.

Item Type:	Thesis (BTech)
Uncontrolled Keywords:	Micro Wire Edm, Taguchi Method
Subjects:	Engineering and Technology > Mechanical Engineering > Production Engineering
Divisions:	Engineering and Technology > Department of Mechanical Engineering
ID Code:	1937
Deposited By:	agarwal ricky
Deposited On:	19 May 2010 17:34
Last Modified:	19 May 2010 17:34
Related URLs:	Dspace
Supervisor(s):	Maity, K P