ECM Process Characteristics

Meher, Anil (2009) ECM Process Characteristics. BTech thesis.

PDF 408Kb

Abstract

This paper intends to deal with the process characteristics of ECM and how it is affected by the process parameters. This work shows a study of the intervening variables in electrochemical machining (ECM) of mild steel (C=0.08%, Mn=0.35%, P=0.014%, S=0.018%, Si=0.017%, Fe=rest). The material removal rate (MRR) was studied. Two parameters were changed during the experiments: feed rate and voltage. Sodium chloride solution was taken as electrolyte (100gm/lt). The results show that feed rate was the main parameter affecting the MRR.

Item Type:	Thesis (BTech)
Uncontrolled Keywords:	ECM,Process,Characteristics
Subjects:	Engineering and Technology > Mechanical Engineering > Production Engineering
Divisions:	Engineering and Technology > Department of Mechanical Engineering
ID Code:	1311
Deposited By:	Anil Meher
Deposited On:	17 May 2009 11:50
Last Modified:	17 May 2009 11:50
Supervisor(s):	Nanda, B K