Padhy, Durga Madhab (2011) A case study on Application of FUZZY logic in Electrical Discharge Machining(EDM). BTech thesis.
![[img]](http://ethesis.nitrkl.ac.in/style/images/fileicons/application_pdf.png) | PDF 261Kb |
Abstract
Electrical Discharge Machining (EDM) is one of the most accurate manufacturing processes available for creating complex or simple shapes and geometries within parts and assemblies. EDM works by eroding material in the path of electrical discharges that form an arc between an electrode tool and the work piece. EDM manufacturing is quite affordable and a very desirable manufacturing process
when low counts or high accuracy is required. Turn around time can be fast and depends on manufacturer back log. The EDM system consists of a shaped tool or wire electrode, and the part. The part is connected to a power supply. Sometimes to create a potential difference between the work piece and tool, the work piece is immersed in a dielectric (electrically non-conducting) fluid which is circulated to flush away debris.
when low counts or high accuracy is required. Turn around time can be fast and depends on manufacturer back log. The EDM system consists of a shaped tool or wire electrode, and the part. The part is connected to a power supply. Sometimes to create a potential difference between the work piece and tool, the work piece is immersed in a dielectric (electrically non-conducting) fluid which is circulated to flush away debris.
| Item Type: | Thesis (BTech) |
|---|---|
| Uncontrolled Keywords: | EDM , S/N ratio , MPCI , MRR |
| Subjects: | Engineering and Technology > Mechanical Engineering > Production Engineering |
| Divisions: | Engineering and Technology > Department of Mechanical Engineering |
| ID Code: | 2431 |
| Deposited By: | Mr. Durga Madhaba Padhy |
| Deposited On: | 17 May 2011 18:27 |
| Last Modified: | 17 May 2011 18:27 |
| Supervisor(s): | Datta, S |
Posts
0 comments:
Post a Comment