Saturday, 20 July 2013
- Home
- GATE-ME-2011
- GATE-MECHANICAL ENGINEERING-2011 (Question and Solutions)
GATE-MECHANICAL ENGINEERING-2011 (Question and Solutions)
Posted By Admin
On 07:17
Advertisement
Subscribe Us
Labels
- 2D problem of thick-walled cylinders
- 3-D modeling
- 3D Curves
- 3D problem of thick-walled cylinders
- aa
- Abaqus
- Advanced X-Sectional Results: Using Paths to Post Process Results
- Aerospace
- AFEA L1- Part 1
- Albire
- Analytical Modeling
- ANSYS
- Ansys tutorials by kxcad.net
- Ansys tutorials by Teaching Staff me.cmu.edu
- ANSYS - Bird Impact Test Tutorial
- Ansys - Simulation Example 1
- Ansys - Simulation Example 2
- Ansys - Simulation Example 3
- Ansys - Simulation Example 4
- Ansys - Simulation Example 5
- Ansys - Simulation Example 6
- Ansys - Simulation Example 7 Part 1
- Ansys - Simulation Example 7 Part 2
- Ansys : Bridge Truss Tutorial
- ANSYS 12.1 (part 1 of 2) ICEM CFD setup for Tetra/Prism meshing of a simple manifold
- ANSYS 12.1 (Part 1 of 3) ICEM CFD Hexa 2D Airfoil meshing
- ANSYS 12.1 (part 2 of 2) ICEM CFD Tetra/Prism meshing of a simple manifol
- ANSYS 12.1 (Part 2 of 3) ICEM CFD Hexa 2D Airfoil meshing
- ANSYS 12.1 (Part 3 of 3) ICEM CFD Hexa 2D Airfoil meshing
- Ansys Composite Analysis Shell 99 tutorial
- ANSYS Finite Element Analysis University of Alberta Mechanical Engineering
- ANSYS ICEM CFD
- ANSYS Learning Modules university
- ANSYS Parametric Design Language (APDL)
- Ansys Torque Application on a Composite Drive Shaft LS DYNA
- ANSYS Training Materials
- Ansys Tutorial : Electromagnetics Analysis II
- Ansys Tutorials
- Ansys University of Alberta Tutorials
- ANSYS Workbench -Exp. Anslis
- ANSYS Workbench EX 3
- ANSYS Workbench Mechanical 12.1 -A Kinematics and Dynamics Study
- Ansys Workbench Transient MUlti Body Dynamics-part 2
- ANSYS-VAMUCH User Interface Tutorial--Analysis 2-D Unit Cell
- Application of Distributed Loads
- Application of Joints and Springs in ANSYS
- Audio
- AUDIOS
- Autodesk Inventor
- Automatic CFD meshing on complex passenger cabin geometry
- Automobile
- Automotive
- Axisymmetric problem of thick-walled cylinders
- Beam - Pressure Loading
- BHEL
- Bicycle Example
- BOOKS
- Bridge Truss Tutorial
- Buckling
- Cad
- CAM
- CAMWorks for UG-NX
- Career
- Catia
- CFD
- Changing Graphical Properties
- Common catia or unigraphics interview question
- Communicating Using SolidWorks
- Composites
- Configuration Management (Excel)
- Contact Elements
- Control systems
- Convert AutoCAD to ANSYS of dome shape element
- Coupled Structural/Thermal Analysis
- Curved Blade - Modal Analysis
- Data Plotting: Using Tables to Post Process Results
- Design
- Design Library
- Design Optimization
- Document Properties
- Download IES (Indian Engineering Services)- MECHANICAL ENGINEERING Previous Question papers from 1985 to 2008.
- dsd
- Effect of Self Weight on a Cantilever Beam
- Eneargy
- Energy
- Engineering - Creating a Simple Drawing in Solidworks (Andrew Leroy)
- EX 1
- Fatigue
- File Management
- Finite Element Analysis
- Finite Element method
- Finite Element Methods
- Flexural modulus
- Flexural strength
- FLUENT
- GAIL (India) Limited
- GAMBIT
- GATE
- Gate 2010 Question paper
- GATE ME 2010
- GATE Syllabus for Mechnical Engineering - ME
- GATE-ME-1994
- GATE-ME-1995
- GATE-ME-1996
- GATE-ME-1997
- GATE-ME-1998
- GATE-ME-1999
- GATE-ME-2000
- GATE-ME-2001
- GATE-ME-2002
- GATE-ME-2003
- GATE-ME-2004
- GATE-ME-2005
- GATE-ME-2006
- GATE-ME-2007
- GATE-ME-2008
- GATE-ME-2009
- GATE-ME-2010
- GATE-ME-2011
- GATE-ME-2012
- GATE-ME-2013
- General
- Graphical Solution Tracking
- Harmonic Analysis of a Cantilever Beam
- Heat Transfer
- Heat treatment
- how ball bearings ball bearings
- Hypermesh
- hypermesh-video-pdf-tutorial
- HYPERWORKS FOR STUDENTS
- IES
- Image Processing
- Industrial Management
- Installation and Troubleshooting
- Interpreting SolidWorks Feedback
- Introducing MD Nastran Desktop
- IOCL
- Jaipur Vidyut Vitran Nigam Limited
- kinetostatic analysis
- Landing gear analysis
- Library Features
- List of colleges
- Machine Design
- Magneto-static
- Management
- Management Systems
- Manufacturing
- MANUFACTURING EXAMPLE 1 NX5 Tutorial
- Measurement
- Mechanical Government Jobs
- Mechanics of materials
- Melting Using Element Death
- Modal Analysis of a Cantilever Beam
- Model analysis of a wing
- model analysis of a wing using ansys
- Model of rocker-valve system
- Modeling and simulation
- Modeling Tools
- Modelling Using Axisymmetry
- NALCO
- NASA | Beyond Einstein: Part I
- Nastran and Solidworks
- Non Linear Buckling
- NonLinear Analysis of a Cantilever Beam
- NonLinear Materials
- Numerical study
- One-sided tension of a plate with a circular hole
- Parabolic Leaf Srping
- Performance
- Plane Stress Bracket
- Plane Stress Bracket CMD
- Predicting
- Pro-e WildFire
- Production
- PROJECTS
- Projects/Thesis
- R12 FLUENT
- Reference Geometry
- RITES Ltd
- Simple Conduction Example
- Simulation
- Solid Edge
- Solid Model Creation
- Solid Model Creation CMD
- solid model of the pulley
- solid model of the Spindle Base
- SOLIDWORKS
- SolidWorks 2011 What's New - Drawing Enhancements
- Space Frame Example
- Space Frame Example CMD
- SpaceClaim Direct Modeler - PART 1
- SpaceClaim Direct Modeler - PART 2
- ssss
- Strength of materials
- Substructuring
- SW 2005 What's New - Animator
- SW 2005 What's New - Assemblies
- SW 2005 What's New - PDMWorks
- SW 2006 What's New - Assemblies
- SW 2006 What's New - COSMOS
- SW 2006 What's New - Drawings Part 1
- SW 2006 What's New - Drawings Part 2
- SW 2006 What's New - Features and Parts
- SW 2006 What's New - Fundamentals
- SW 2006 What's New - PDMWorks
- SW 2006 What's New - Sheet Metal
- SW 2006 What's New - Sketching
- SW05.Whats.New.Misc
- SW06.Whats.New.PDMWorks
- System Options
- Tensile modulus
- Tensile Strength
- Thermal
- Thermal - Mixed Boundary Example
- Thermal - Mixed Boundary Example (Conduction/Convection/Insulated)
- Thermal FEA and CFD
- Thermo mechanical analysis
- This section pertains to One Dimensional Heat Transfer Composite Wall
- This section pertains to One Dimensional Heat Transfer Single Fin
- Transient Analysis of a Cantilever Beam
- Transient Thermal Conduction Example
- TRICKS
- Tutorial: parametric interface with ProENGINEER
- Two Dimensional Truss
- Two Dimensional Truss CMD
- UI Customization
- Unigraphics(NX3)
- UPRVUNL
- Using P-Elements
- Vibrations
- VIDEOS
- Viewing X-Sectional Results
- Welcome
- Weldments
- Workbench Reporting Linear Vibrations of a Fan example
- workbench EX 2
- Workbench R12 - DEMO
- Workbench Revit example
- Workbench Static Example
- Workbench static structural on bridge Example
- Workbench Transient MUlti Body Dynamics-Part 1
Popular Posts
-
ANSYS Utilities An introduction to using ANSYS, including a quick explanation of the stages of analysis, how to start ANSYS, and the use of ...
-
Yes its possible to change the line thickness. Click on the Common Plot option icon (the first one first row and the one on the left to th...
-
See the section on Cross-section orientation in the chapter Using Beam Elements of the Getting Started with ABAQUS/Standard manual for...
-
Products: Abaqus/Standard Abaqus/Explicit The self-contact capability in Abaqus is illustrated with two examples derived from the automo...
-
Input file for the first run dynam.inp Include the line *RESTART, WRITE, FREQ=1 in the second step of this input file and this will write ...
-
From a command prompt window (DOS Window) from the same directory from which the job was submitted. Re-type job submission command but this ...
-
For shells the positive normal is given by the right-hand rule going around the nodes of the element in the order they are given in the elem...
-
Introduction This tutorial was completed using ANSYS 7.0 The purpose of this tutorial is to familiarize the user with the ANSYS Parametric D...
-
Paul Saadetian , Ryerson University Date of Award 2005 Degree Type Thesis Degree Name Master of Applied Science (MASc) Department Mechanica... -
Introduction This tutorial was created using ANSYS 7.0 to solve a simple 3D space frame problem. Problem Description The problem to be solve...
About The Author
Blog Archive
-
▼
2013
(298)
-
▼
July
(82)
- Modeling and simulation for a PEM fuel cell with c...
- Use of concept maps and wikis for early engineerin...
- Optimal control of a bleed air temperature regulat...
- Optimal control of a bleed air temperature regulat...
- Thermo mechanical analysis of through-hole solder ...
- A numerical study of free convective heat transfer...
- A simplified model of the thermal interaction of a...
- A simplified model of the thermal interaction of a...
- An experimental study of soil thermal conductivity...
- A fatigue damage model developed based on stiffnes...
- Module-based kinetostatic analysis and optimizatio...
- A quasi-2D finite element formulation of active co...
- Three-dimensional modelling of ground surfaces
- LEED Canada energy performance modelling of a medi...
- Studies on industrial vision inspection methods
- Development of novel polystyrene composite beads f...
- Resolution of indeterminate landing gear structure...
- Reliability of soldered joints for aerospace appli...
- Analytical Modeling of Particle Interference in Mi...
- Effect of heat treatment on mechanical properties ...
- Energy performance analysis of Region of Peel Head...
- 3-D modeling and simulation of crystal growth of G...
- Image Processing Techniques For Improved Sun Senso...
- Integration Of Environmental Management Systems An...
- Design of a prototype bioresorbable tibial implant...
- Development of modular and reconfigurable robot wi...
- Experimental measurement of Soret coefficient and ...
- Cyclic deformation behavior of an automotive material
- A cost optimized energy retrofit upgrade of the Ca...
- Mechanical properties of wrought magnesium alloys
- Three-dimensional numerical simulation of crystal ...
- Design And Development Of Power And Attitude Contr...
- A three-dimensional multibody computational model ...
- Optimal multistage relaxation with automatic param...
- Thin wafer dicing using a high repetition rate fem...
- Thermo-physical characteristics of building integr...
- A two level supply chain design under demand and e...
- Intelligent Condition Monitoring Models For Rotating
- Thermo-solutal convection with Soret effect
- Intelligence-based safety decision models for trai...
- Viability Of Hybrid Ground Source Heat Pump System...
- A technique to measure turbulent free convective h...
- A technique to measure turbulent free convective h...
- Experimental studies of vibrations of flexible str...
- Heat Transfer To Small Cylinders Within A Packed Bed
- A quadrinomial lattice model that incorporates ske...
- Fundamentals of mega hertz femtosecond laser ablat...
- Fatigue damage and life assessment of welded joint...
- The effect of temperature on fatigue strength and ...
- The use of lithium salts and supplementary cementi...
- Industrial Engineers on their Current Practice: Im...
- Two-photon polymerization using femtosecond laser
- Improving Power Density Of A Class Of Piezoelectic...
- Microstructural characterization and mechanical pr...
- Offshore vs. domestic sourcing in a retail environ...
- Numerical Investigation Of Thermodiffusion Effects...
- Predicting system collapse : application of kernel...
- Prediction Of Particle Laden Flow In Gas Pipe
- Inventory management in reverse logistics with imp...
- Laser induced reverse transfer for microfabrication
- A Study On Grain Refinement And Hot Tearing In Per...
- Femtosecond Laser Machining At Submicron And Nano ...
- GATE-MECHANICAL ENGINEERING-2013 (Question and Sol...
- GATE-MECHANICAL ENGINEERING-2012 (Question and Sol...
- GATE-MECHANICAL ENGINEERING-2011 (Question and Sol...
- GATE-MECHANICAL ENGINEERING-2010 (Question and Sol...
- GATE-MECHANICAL ENGINEERING-2009 (Question and Sol...
- GATE-MECHANICAL ENGINEERING-2008 (Question and Sol...
- GATE-MECHANICAL ENGINEERING-2007 (Question and Sol...
- GATE-MECHANICAL ENGINEERING-2005 (Question and Sol...
- GATE-MECHANICAL ENGINEERING-2004 (Question and Sol...
- GATE-MECHANICAL ENGINEERING-2003 (Question and Sol...
- GATE-MECHANICAL ENGINEERING-2002 (Question and Sol...
- GATE-MECHANICAL ENGINEERING-2001 (Question and Sol...
- GATE-MECHANICAL ENGINEERING-2000(Question and Solu...
- GATE-MECHANICAL ENGINEERING-1999 (Question and Sol...
- GATE-MECHANICAL ENGINEERING-1998 (Question and Sol...
- GATE-MECHANICAL ENGINEERING-1997 (Question and Sol...
- GATE-MECHANICAL ENGINEERING-1996 (Question and Sol...
- GATE-MECHANICAL ENGINEERING-1995 (Question and Sol...
- GATE-MECHANICAL ENGINEERING-1994 (Question and Sol...
- GATE-MECHANICAL ENGINEERING-2006 (Question and Sol...
-
▼
July
(82)
Labels List
- 2D problem of thick-walled cylinders
- 3-D modeling
- 3D Curves
- 3D problem of thick-walled cylinders
- aa
- Abaqus
- Advanced X-Sectional Results: Using Paths to Post Process Results
- Aerospace
- AFEA L1- Part 1
- Albire
- Analytical Modeling
- ANSYS
- Ansys tutorials by kxcad.net
- Ansys tutorials by Teaching Staff me.cmu.edu
- ANSYS - Bird Impact Test Tutorial
- Ansys - Simulation Example 1
- Ansys - Simulation Example 2
- Ansys - Simulation Example 3
- Ansys - Simulation Example 4
- Ansys - Simulation Example 5
- Ansys - Simulation Example 6
- Ansys - Simulation Example 7 Part 1
- Ansys - Simulation Example 7 Part 2
- Ansys : Bridge Truss Tutorial
- ANSYS 12.1 (part 1 of 2) ICEM CFD setup for Tetra/Prism meshing of a simple manifold
- ANSYS 12.1 (Part 1 of 3) ICEM CFD Hexa 2D Airfoil meshing
- ANSYS 12.1 (part 2 of 2) ICEM CFD Tetra/Prism meshing of a simple manifol
- ANSYS 12.1 (Part 2 of 3) ICEM CFD Hexa 2D Airfoil meshing
- ANSYS 12.1 (Part 3 of 3) ICEM CFD Hexa 2D Airfoil meshing
- Ansys Composite Analysis Shell 99 tutorial
- ANSYS Finite Element Analysis University of Alberta Mechanical Engineering
- ANSYS ICEM CFD
- ANSYS Learning Modules university
- ANSYS Parametric Design Language (APDL)
- Ansys Torque Application on a Composite Drive Shaft LS DYNA
- ANSYS Training Materials
- Ansys Tutorial : Electromagnetics Analysis II
- Ansys Tutorials
- Ansys University of Alberta Tutorials
- ANSYS Workbench -Exp. Anslis
- ANSYS Workbench EX 3
- ANSYS Workbench Mechanical 12.1 -A Kinematics and Dynamics Study
- Ansys Workbench Transient MUlti Body Dynamics-part 2
- ANSYS-VAMUCH User Interface Tutorial--Analysis 2-D Unit Cell
- Application of Distributed Loads
- Application of Joints and Springs in ANSYS
- Audio
- AUDIOS
- Autodesk Inventor
- Automatic CFD meshing on complex passenger cabin geometry
- Automobile
- Automotive
- Axisymmetric problem of thick-walled cylinders
- Beam - Pressure Loading
- BHEL
- Bicycle Example
- BOOKS
- Bridge Truss Tutorial
- Buckling
- Cad
- CAM
- CAMWorks for UG-NX
- Career
- Catia
- CFD
- Changing Graphical Properties
- Common catia or unigraphics interview question
- Communicating Using SolidWorks
- Composites
- Configuration Management (Excel)
- Contact Elements
- Control systems
- Convert AutoCAD to ANSYS of dome shape element
- Coupled Structural/Thermal Analysis
- Curved Blade - Modal Analysis
- Data Plotting: Using Tables to Post Process Results
- Design
- Design Library
- Design Optimization
- Document Properties
- Download IES (Indian Engineering Services)- MECHANICAL ENGINEERING Previous Question papers from 1985 to 2008.
- dsd
- Effect of Self Weight on a Cantilever Beam
- Eneargy
- Energy
- Engineering - Creating a Simple Drawing in Solidworks (Andrew Leroy)
- EX 1
- Fatigue
- File Management
- Finite Element Analysis
- Finite Element method
- Finite Element Methods
- Flexural modulus
- Flexural strength
- FLUENT
- GAIL (India) Limited
- GAMBIT
- GATE
- Gate 2010 Question paper
- GATE ME 2010
- GATE Syllabus for Mechnical Engineering - ME
- GATE-ME-1994
- GATE-ME-1995
- GATE-ME-1996
- GATE-ME-1997
- GATE-ME-1998
- GATE-ME-1999
- GATE-ME-2000
- GATE-ME-2001
- GATE-ME-2002
- GATE-ME-2003
- GATE-ME-2004
- GATE-ME-2005
- GATE-ME-2006
- GATE-ME-2007
- GATE-ME-2008
- GATE-ME-2009
- GATE-ME-2010
- GATE-ME-2011
- GATE-ME-2012
- GATE-ME-2013
- General
- Graphical Solution Tracking
- Harmonic Analysis of a Cantilever Beam
- Heat Transfer
- Heat treatment
- how ball bearings ball bearings
- Hypermesh
- hypermesh-video-pdf-tutorial
- HYPERWORKS FOR STUDENTS
- IES
- Image Processing
- Industrial Management
- Installation and Troubleshooting
- Interpreting SolidWorks Feedback
- Introducing MD Nastran Desktop
- IOCL
- Jaipur Vidyut Vitran Nigam Limited
- kinetostatic analysis
- Landing gear analysis
- Library Features
- List of colleges
- Machine Design
- Magneto-static
- Management
- Management Systems
- Manufacturing
- MANUFACTURING EXAMPLE 1 NX5 Tutorial
- Measurement
- Mechanical Government Jobs
- Mechanics of materials
- Melting Using Element Death
- Modal Analysis of a Cantilever Beam
- Model analysis of a wing
- model analysis of a wing using ansys
- Model of rocker-valve system
- Modeling and simulation
- Modeling Tools
- Modelling Using Axisymmetry
- NALCO
- NASA | Beyond Einstein: Part I
- Nastran and Solidworks
- Non Linear Buckling
- NonLinear Analysis of a Cantilever Beam
- NonLinear Materials
- Numerical study
- One-sided tension of a plate with a circular hole
- Parabolic Leaf Srping
- Performance
- Plane Stress Bracket
- Plane Stress Bracket CMD
- Predicting
- Pro-e WildFire
- Production
- PROJECTS
- Projects/Thesis
- R12 FLUENT
- Reference Geometry
- RITES Ltd
- Simple Conduction Example
- Simulation
- Solid Edge
- Solid Model Creation
- Solid Model Creation CMD
- solid model of the pulley
- solid model of the Spindle Base
- SOLIDWORKS
- SolidWorks 2011 What's New - Drawing Enhancements
- Space Frame Example
- Space Frame Example CMD
- SpaceClaim Direct Modeler - PART 1
- SpaceClaim Direct Modeler - PART 2
- ssss
- Strength of materials
- Substructuring
- SW 2005 What's New - Animator
- SW 2005 What's New - Assemblies
- SW 2005 What's New - PDMWorks
- SW 2006 What's New - Assemblies
- SW 2006 What's New - COSMOS
- SW 2006 What's New - Drawings Part 1
- SW 2006 What's New - Drawings Part 2
- SW 2006 What's New - Features and Parts
- SW 2006 What's New - Fundamentals
- SW 2006 What's New - PDMWorks
- SW 2006 What's New - Sheet Metal
- SW 2006 What's New - Sketching
- SW05.Whats.New.Misc
- SW06.Whats.New.PDMWorks
- System Options
- Tensile modulus
- Tensile Strength
- Thermal
- Thermal - Mixed Boundary Example
- Thermal - Mixed Boundary Example (Conduction/Convection/Insulated)
- Thermal FEA and CFD
- Thermo mechanical analysis
- This section pertains to One Dimensional Heat Transfer Composite Wall
- This section pertains to One Dimensional Heat Transfer Single Fin
- Transient Analysis of a Cantilever Beam
- Transient Thermal Conduction Example
- TRICKS
- Tutorial: parametric interface with ProENGINEER
- Two Dimensional Truss
- Two Dimensional Truss CMD
- UI Customization
- Unigraphics(NX3)
- UPRVUNL
- Using P-Elements
- Vibrations
- VIDEOS
- Viewing X-Sectional Results
- Welcome
- Weldments
- Workbench Reporting Linear Vibrations of a Fan example
- workbench EX 2
- Workbench R12 - DEMO
- Workbench Revit example
- Workbench Static Example
- Workbench static structural on bridge Example
- Workbench Transient MUlti Body Dynamics-Part 1
Posts
very informative post indeed.. being enrolled in @ http://www.wiziq.com/course/9577-crack-gate-mechanical-engineering-with-full-syllabus-preparation ,I was looking for such articles online to assist me for GATE mechanical engineering studies.. and your post helped me a lot :).one more thing,can you recommend me few books for GATE mechanical engineering coaching which can further assist me in my preparation.any advice will be highly obliged and appreciated. :)
ReplyDelete